Over the years, the field of machine and welding processing, three-dimensional flexible combination of tooling has become increasingly more widely used. A lot of practical experience to newer technology means more production. 3D clamping system has already become a steel structure, basic parts and all the welding pieces of processing an indispensable tool for fast positioning and clamping.
    Top quality and product
Use of a common 3D welding table, either flat or vertical positioning and clamping can be. Through the modular system, you can accurately and fast processing of your parts. Such as: machine casing, rails, frames, beams, brackets, escalators, door frames, control cabinet, thin-walled box and so on.
1, economy
Complex and expensive traditional jig has become history. You can remove a large number of special tooling cost of reserves, because the 3D system does not require changes to the workplace for all. Such a sophisticated device is simple, safe to use.
2, Flexible
3D welding table is very strong, can withstand very high load. Its five surface holes were processed with the rules, and engraved with the network cable. (Hole no gradient and T-slot). In the 3D welding table, any piece can be clamped with the positioning pin (PC sales) for a variety of positioning and clamping. This PC sales have been patented. Several 3D table can be directly connected with any of the five surface. This modular system installation, adjustment and clamping the workpiece in a perfect embodiment of its common function. Its advantage is achieved in particular, large parts of the applications.
3, accuracy
In the assembly or welding process, the use of positioning blocks, connecting blocks, clamps, support block, capable of accurately positioning the workpiece, the workpiece firmly fixed on the surface of each anchor or positioning. Unable to locate the workpiece is very small chance. If the geometry of the workpiece itself is not accurate and can be quickly detected, in the primary processing processes will be eliminated.
4, repetitive
The use of CAD, you can be very easy to use workshop has been to simulate the components assembled.
5, strong and durable
In the welding process requires only low-cost anti-spatter fluid can remove the 3D surface of the welding spatter table. Workbench have been aging treatment and special processing.

    Through modular design with interchangeable, you can in a short time to complete the complex and precise tooling combinations. Whether is to produce a single part or assembly of components, this approach is very economical.
Table as well as the module on the grid of high-precision hole, so that setup to achieve high accuracy and high repeatability.
Face has a table of 5 100 * 100MM grid (D28 series) and 50 * 50MM grid (D16 series), so its scope of work will have no difficulty in the direction of extension of 5.
Three-dimensional table of all sizes are very accurate. It consists of high-quality steel with high strength and rigidity.
Using the positioning block and clamp angle mode, each side extending 800MM
An extension of the hypotenuse with angle-mode
You can follow your wishes an extension of 3D Workbench
Large workpieces can use the rail system, rail fixed on the ground.
Using the positioning frame and supporting leg, extending large parts of the fixed
Several workstations connected together, in the vertical or horizontal positioning of the composition of a wide datum

    Three-dimensional structure of the module through the standard, three-dimensional flexible clamping system can be used for a variety of shapes and sizes of the workpiece. Our system not only applies to your current needs, but also for your future needs ready.

    In the machine tool base, chassis cabinets, engineering machinery, vehicles, cars, pressure vessels and other product manufacturing, as well as the pilot plant, laboratories and so on need for accurate positioning, clamping and welding.

    Through continuous efforts, we have won the high degree of market recognition. My company's flexible modular fixture from the selection process are expected to strictly follow the world's most advanced technology, the main processing equipment CNC gantry milling machine, high precision welding ensures precise positioning of the geometric shapes.
TIPTOP flexible clamp is widely used in motor, chassis, cabinets, buses, construction machinery and other industries. Reliable and durable, is a combination of general-purpose fixtures, using a simple, easy to maintain.
TIPTOP three-dimensional flexible composite systems using standardized tables and accessories, setup quick and easy to adjust. For the common structural parts, a skilled fitter for an hour or so can be setup to complete.

    Through our customer support and feedback, we will continue to optimize our system, to promote new applications.

    TIPTOP three-dimensional flexible system that all components are made of high-quality steel, each shape have a variety of specifications and can be completely interchangeable, to accommodate the processing needs of a variety of workpieces.